Cart
Your cart is empty















Tire Hugger Front Fender for H-D® 1983-2013 Street Glide, Road Glide and Road King
16"-19" Front Wheel / Level
915 South Kimball Street
915 South Kimball Street
Mitchell SD 57301
United States
Choose options
The Tire Hugger Front Fender for Harley-Davidson® 1983-2013 Street Glide (FLHT, FLHX), Road Glide (FLTR) and Road King (FLHR) offers a refined departure from traditional “full-coverage” designs. This series presents a curated selection of cuts, each designed to follow the tire’s contours and emphasize your wheel, adding a bold, purposeful edge to your bike’s profile.
These direct bolt-on replacement fenders deliver a streamlined, dynamic aesthetic that enhances the style and stance of your Touring model with precision.
Made in the USA
14-Gauge Steel: Klock Werks Front Fenders are stamped from 14-gauge steel using precision, deep-draw stamping technology that ensures a consistently smooth and flawless finish, minimizing bodywork. The 14-gauge steel is even strong enough to act as a fork brace for your front end.
Laser Cut: Laser cut using 5-axis laser technology ensures accurate fitment for direct bolt-on installation.
E-Coated: Klock Werks then goes the extra mile to add e-coat (electro-static coating), a process that minimizes the need for bodywork and continues to resist rust and corrosion even after it’s painted.
Painter Approved: Painters love our fenders and you will too! All Klock Werks Front Fenders are stamped from 14 gauge steel using precision, deep-draw stamping technology that ensures a consistently smooth and flawless finish, minimizing bodywork.
Klock Werks Front Fender Mounting Blocks are machined from billet aluminum and available in a Satin (Raw) finish. They are designed to provide perfect spacing for easy installation of your Tire Hugger Front Fender.
Sold Separately: Installation requires use of Front Fender Mounting Blocks and are sold separately. They can be found in the "You may also like" suggestions on this page or here.
16"/17"/18"/19" (19" with a 130/60-19 tire) use 7/8" Wide Mounting Blocks
1983-2013 Harley-Davidson Electra Glide / Ultra (FLHT)
1983-2013 Harey-Davidson Street Glide (FLHX)
1983-2013 Harley-Davidson Road King (FLHR)
1983-2013 Harley-Davidson Road Glide (FLTR)
1983-2013 Harley-Davidson Trike Models
| SIZE | DESCRIPTION | PART # | KW PART # |
| 16"-19" | Tire Hugger Level | 1401-0236 | KWF-01-0112 |
| 16"-19" | Tire Hugger Slicer | 1401-0220 | KWF-01-0102 |
| 16"-19" | Tire Hugger Thickster | 1401-0212 | KWF-01-0110 |
| 16"-19" | Tire Hugger Tude | 1401-0232 | KWF-01-0106 |
| 16"-19" | Tire Hugger Wrapper | 1401-0224 | KWF-01-0104 |
| 21" | Tire Hugger Level | 1401-0237 | KWF-01-0113 |
| 21" | Tire Hugger Slicer | 1401-0221 | KWF-01-0103 |
| 21" | Tire Hugger Thickster | 1401-0213 | KWF-01-0111 |
| 21" | Tire Hugger Tude | 1401-0233 | KWF-01-0107 |
| 21" | Tire Hugger Wrapper | 1401-0225 | KWF-01-0105 |
14-Gauge Steel
All Klock Werks fenders are stamped from 14-gauge steel using precision, deep-draw stamping technology
E-Coat
No, our fenders aren’t painted black - that's actually e-coat! E-coat (electro-static coating) is used to prevent rust and corrosion
Laser Cut
Laser cut using 5-axis laser technology to ensure accurate fitment for direct bolt-on installation
Painter Approved
A consistently smooth and flawless finish minimizes bodywork at the painter, saving you cash
No, our fenders are not painted. They will arrive coated with a black electro-static coating – also known as e-coat. E-coat minimizes bodywork and continues to resist rust and corrosion evenafterit’s painted. There is no way we would sell a steel fender without it!
We cannot paint your fender. However, we have great partners we highly recommend you contact.
The Factory Match
thefactorymatch.com
The Fairing XChange
thefairingxchange.com
Absolutely not! We take pride in the fact that every single one of our fenders are stamped from 14-gauge steel using precision, deep-draw stamping technology. The steel is even rigid enough to act as a fork brace for the front end of your bike.
Most OEM fenders use lighter, cheaper materials that can crack or warp over time. Klock Werks uses 14-gauge stamped steel, which provides superior structural rigidity. It won't shatter from road debris and actually acts as a fork brace, improving the stability and handling of your front end.
Read more about why steel fenders are better.
Every Klock Werks fender undergoes an electro-static coating (e-coat) process. This isn't just a primer; it’s a protective barrier that seals the metal inside and out against rust and corrosion. For you, it means the fender arrives painter-ready with a smooth surface that requires minimal bodywork, saving you time and money at the paint shop.
To maintain the "show-room" shine and protect your paint, we recommend regular cleaning with Shine Werks motorcycle detailing products. Because of the e-coat foundation, your fender is already highly resistant to rust, but keeping it free of road salt and grime will ensure your custom paint job lasts for years.
We eliminate the guesswork through 5-axis laser technology. Our fenders are designed specifically for most Harley-Davidson® and Indian® models. Instead of universal drilling, you simply select your bike model and tire size (from 16” to 21”). The fitment is a direct bolt-on, matching your factory mounting points exactly.
Before sending to paint, always make sure to test fit your fender to avoid a serious WHOOPS with painting expenses.
Yes, all mounting holes are pre-cut using 5-axis laser technology for accurate fitment and bolt-on ease.
While our fenders align with factory points, we recommend our billet aluminum Mounting Blocks. These are machined to ensure perfect spacing and a "clean" look by eliminating unsightly rivets. They are available individually or as part of a Fender Fit Kit, which includes everything you need for a seamless installation.
Yes. We offer a specific Big Wheel Front Fender family designed to accommodate oversized wheels while maintaining a slim, low profile. Whether you’re running a 19” or a 21” wheel, we have a stamped steel option that contours perfectly to the tire for that "slammed" custom look.
To make installation even easier, some of our fenders are packaged with the fender, mounting blocks, and hardware all in one box! If it says ‘Fit Kit’ in the product title – it’ll include everything you need.
If you are not buying a Fit Kit, make sure you order fender mounting blocks!
No, you cannot directly hydro drip our fenders because of the e-coating. The fender will need to be prepped, sanded, primed, base coat painted, hydro dipped then clear coated.
Yes! If it has not been installed or damaged, you are able to return your fender.