A Stretched Look at a Fraction of the Cost: Klock Werks Metal Dashes for Harley-Davidson®

A Stretched Look at a Fraction of the Cost: Klock Werks Metal Dashes for Harley-Davidson®

A stretched tank look usually means a stretched budget. The Klock Werks® Curvaceous Metal Dash and Softail® Dash Relocation Kit get you there for a fraction of the cost.

Stretched tanks are one of the most recognizable looks in the custom bagger world. They're also one of the most expensive, with fabrication, paint and fitment costs that add up fast. Klock Werks® offers a simpler way to get that long, flowing line: replace the stock dash.

The Curvaceous Metal Dash for Harley-Davidson® Street Glide®, Road Glide® and Electra Glide® models, and the Dash and Ignition Relocation Kit for Softail® models, both clean up the top of the tank and make it look longer, without cutting or stretching a thing.

A Sleek Addition To Your Ride

The stock dash on a Harley touring bike is bulky, plastic and covered in hardware. The Curvaceous Metal Dash replaces it with one smooth, low profile panel that flows with the shape of the tank. It's stamped from steel, laser cut and e-coated to resist rust and corrosion, and it ships ready for paint with minimal prep. Paint it to match your tank, or have it chromed for contrast.

The Bagger Blog put it best: "The Curvaceous Dash is a beautiful piece. Its simple, yet elegant styling flows perfectly with the shape of Harley's touring tank." They also noted that "the dash is remarkably sturdy" and that "fitment of the dash is great."

Choose Your Length

  • Stock Length (2008 to 2025): for stock tanks and FLH style seats.

  • Extended (2008 to 2025): for stretched tanks, or stock tanks with shorter aftermarket or custom seats. This is the version that gives you the stretched look.

  • Extended (1997 to 2007): for earlier touring models.

Every Curvaceous Metal Dash includes the dash, dash trim and instructions. It's built to accept most aftermarket low profile vented gas caps. A vented cap is required and sold separately through Drag Specialties or your local dealer. The dash is made in the USA.

Street Glide, Road Glide and Touring Fitment

The 2008 to 2025 Curvaceous Metal Dash fits:

  • Street Glide® and Electra Glide®: 2008 to 2023 Street Glide (FLHX, FLHXS), 2022 to 2023 Street Glide ST, 2015 to 2022 CVO™ Street Glide, 2008 to 2022 Electra Glide Standard, 2008 to 2025 Electra Glide Police, 2008 to 2013 Electra Glide Classic, 2008 to 2019 Ultra Classic, 2010 to 2023 Ultra Limited, 2008 to 2013 CVO™ Ultra Classic, 2014 to 2021 CVO™ Limited, and the 2021 Electra Glide Revival

  • Road Glide®: 2008 to 2023 Road Glide (FLTR, FLTRX), 2015 to 2023 Road Glide Special, 2022 to 2023 Road Glide ST, 2009 to 2022 CVO™ Road Glide, 2009 to 2025 Road Glide Police, 2011 to 2019 Road Glide Ultra, 2011 to 2016 CVO™ Road Glide Ultra, 2020 to 2024 Road Glide Limited, and 2022 to 2023 CVO™ Road Glide Limited

  • Trikes: 2009 to 2025 Tri Glide® Ultra, 2010 to 2011 Street Glide Trike, 2020 to 2022 CVO™ Tri Glide, and 2023 to 2025 Road Glide 3

It does not fit Street Glide or Road Glide models with the new style fairing, including the 2023 and newer CVO™ Street Glide and CVO™ Road Glide, the 2024 and newer Street Glide and Road Glide, the 2024 and newer CVO™ Road Glide ST, and the 2025 Street Glide Ultra. For 1997 to 2007 touring models, choose the 1997 to 2007 Extended version. Confirm your exact model with Shop Your Ride.

But Wait, There's More!

Softail® riders can get the same long, clean look. The Dash and Ignition Relocation Kit replaces the bulky stock dash with a streamlined metal panel and moves the ignition off the tank, so the tank looks longer without being stretched.

The kit uses your stock ignition switch and key. The chromed ignition mount replaces the horn mount, so the horn needs to be relocated during installation.

The complete dash and ignition kit fits:

  • 2000 to 2017 Heritage Softail® Classic (FLSTC)
  • 2000 to 2015 Softail® Standard (FXST)
  • 2000 to 2003 Heritage Springer (FLSTS)
  • 2006 to 2007 Springer Classic

It does not fit the FXS or FXSTD. An ignition relocation only version is also available for Road King®, Road King® Classic, Road King® Special, Road King® Police, CVO™ Road King®, the 2023 Electra Glide Highway King and the 2015 to 2025 Freewheeler®. Check the product page for exact years.

"It's easily the simplest, and cheapest way to make your ignition switch cover look sexy," The Bagger Blog said.

 

Finish the Look

A clean dash is a natural first step toward a full custom bagger. Pair it with a Flare® windshield for better air management, close up the gaps with Upper Fillers and Lower Fillers for 1995 to 2008 touring models, and explore our performance bagger parts. Browse everything for your bike in our Street Glide®, Road Glide® and Softail® collections. Heritage owners can see the dash kit alongside fenders, Flare® windshields and more in our guide to customizing your Harley-Davidson® Heritage.

Frequently Asked Questions

Q: Will the Curvaceous Metal Dash fit my 2024 Street Glide or Road Glide?

A: No. It fits Street Glide and Road Glide models with the previous fairing, up to the 2023 model year. Bikes with the new style fairing are not compatible.

Q: What's the difference between Stock Length and Extended?

A: Stock Length is made for stock tanks and FLH style seats. Extended is made for stretched tanks or stock tanks with shorter aftermarket seats, and it gives the longer, stretched look.

Q: Do I need a new gas cap?

A: Yes. The dash requires an aftermarket low profile vented gas cap, sold separately through Drag Specialties or your local dealer.

Q: Does it come painted?

A: No. It ships e-coated and ready for paint or chrome, so you can match your bike.

Q: Does the Softail Dash Relocation Kit use my stock ignition?

A: Yes. It uses your stock ignition switch and key. The horn needs to be relocated because the new ignition mount replaces the horn mount.

Q: Which Softail models does the dash kit fit?

A: The complete kit fits the 2000 to 2017 Heritage Softail Classic, 2000 to 2015 Softail Standard, 2000 to 2003 Heritage Springer and 2006 to 2007 Springer Classic. It does not fit the FXS or FXSTD, or 2018 and newer Softail models.

Q: Are these dashes made in the USA?

A: Yes. The Curvaceous Metal Dash is made in the USA.

Get the Look

A stretched look doesn't have to come with a stretched budget. A Klock Werks metal dash gives your bagger or Softail a longer, cleaner line for a fraction of the cost.

Shop the Curvaceous Metal Dash or Shop the Softail Dash Relocation Kit

It's your ride. You decide.