When Klock Werks® released our custom device mount for the Polaris® Slingshot®, the goal was simple: give Slingshot drivers a phone mount built for an open cockpit. The Slingshot puts you in the wind, the sun and every bump on the road, and a suction cup or spring clamp holder just isn't built for that.
The iOmounts® Magnetic Phone Mount for Polaris® Slingshot® mounts to the Slingshot's windshield brace and holds your phone or GPS with a strong magnetic connection, so navigation, music and calls stay right where you can see them.
Why a Magnetic Phone Mount Works Better in a Slingshot
Most Slingshot phone holders use clamps, arms or suction cups. They rattle, they block buttons, and they make you fight the mount every time you want to grab your phone for a photo or a fuel stop. iOmounts® takes a different approach.
- No clamps to fight. Your phone connects and releases in one motion.
- No bulky case required. A thin steel iOdisc™ on your phone or case does the work.
- Built for vibration. The iOcore™ magnet is rated for a 20 lb hold and is designed for motorcycle and off road use.
- Portrait or landscape. Rotate your phone to whichever view you want for maps or music.
- One system everywhere. The same iOdisc™ works on iOmounts® in your truck, garage, office and home.
- How the iOmounts® System Works
iOmounts® uses three parts that work together.
- The iOdisc™ is a razor thin steel adapter, just 0.025 inches thick, that sticks to your phone or case. The magnet never touches your device.
- The iOcore™ is the magnet that holds the iOdisc™. It's available in eight colors, so you can match your Slingshot.
- The mount holds the iOcore™ in place. On the Slingshot, it's a semisphere dash mount that bolts to the windshield brace.
For extra peace of mind on rough roads, the included Phone Tether connects your phone to the mount as a backup.
Polaris Slingshot Phone Mount Fitment
The iOmounts® Magnetic Phone Mount for Polaris® Slingshot® fits the 2015 to 2023 Slingshot SL and SL LE with the standard windshield brace.
Each kit includes the semisphere dash mount, a black iOcore™, two iOdiscs™, a phone tether and all mounting hardware. Installation instructions are available as a PDF on the product page.
Driving a different trim or a newer Slingshot? The iOmounts® Universal Magnetic Phone Mount and the iOmounts® nomad™ Universal Phone Mount use the same iOdisc™ system and offer flexible mounting options.
Which Phones and Cases Work?
iOmounts® works with any smartphone or GPS unit. For the strongest hold, stick the iOdisc™ to a smooth, hard plastic case. iOdiscs™ won't adhere well to silicone, rubber, soft touch or textured cases. After you apply an iOdisc™, give the adhesive 24 to 72 hours to cure before you drive.
Want wireless charging? Remove your phone from the iOdisc™ equipped case to charge, or use an Inductive Charging iOdisc™ for charging indoors. Extra iOdiscs™ come two to a pack, so you can set up a second phone or device.
Complete Your Slingshot With a Flare® Windshield
Open cockpit driving means wind in your face. The Flare® Windshield for Polaris® Slingshot® replaces the stock screen with the same patented Flare® shape we've built for motorcycles since 2008. Its flipped top edge and side hips redirect air up and around you to cut buffeting and wind noise.
The Slingshot Flare® sits about 6.375 inches from the dash to the top, slightly lower than the roughly 7 inch stock screen, for a cleaner look. It's made in the USA from Lexan® polycarbonate with an FMR hard coating, comes in Clear or Tint, and mounts with stock hardware. It fits a wide range of 2015 to 2023 Slingshot trims, including Base, S, SL, SL LE, SLR, R, GT and LE models; check the product page for your exact year and trim.
Shop every Polaris Slingshot accessory from Klock Werks.
Frequently Asked Questions
Q: Does the iOmounts® phone mount fit my Polaris Slingshot?
A: It fits the 2015 to 2023 Slingshot SL and SL LE with the standard windshield brace. For other trims or years, consider the iOmounts® Universal or nomad™ mount.
Q: Where does the mount attach?
A: It bolts to the Slingshot's windshield brace using the included hardware, putting your phone in the driver's line of sight.
Q: Will my phone fall off on rough roads?
A: The iOcore™ is rated for a 20 lb magnetic hold and is designed for motorcycle and off road vibration. A phone tether is included as a backup.
Q: Does the magnet damage my phone?
A: The magnet never touches your phone. It connects to the thin steel iOdisc™ on your phone or case.
Q: Does it work with any phone?
A: Yes. iOmounts® works with any smartphone or GPS device. Use a smooth, hard plastic case for the best adhesion.
Q: Can I use the same phone in my truck or at home?
A: Yes. Every iOmounts® mount uses the same iOdisc™, so your phone moves between your Slingshot, vehicle, garage and home.
Q: What's included?
A: A semisphere dash mount, a black iOcore™, two iOdiscs™, a phone tether and mounting hardware.
Stay Connected on Every Drive
Your Slingshot is built for the open road. The iOmounts® Magnetic Phone Mount keeps your navigation, music and calls secure, visible and one motion away.
Shop the iOmounts® Magnetic Phone Mount for Polaris® Slingshot®
It's your ride. You decide.
