UTV Flare™ Windshield for Polaris® RZR 2019+
Choose options
The innovative UTV Flare™ Windshield for Polaris RZR—U.S. Pat. No. 10,118,468—design features “hips” at the outer edge of the shield that re-route air, and the “flip” at the top is designed to kick the air up and back as clean, less turbulent air for driver and passenger. This means you’ll have all the wind/debris protection you need without sacrificing your ability to see!
Unlike flat shields that don’t work if they are too low, or visibility is lost if it’s too high, you’ll still be able to look over the Flare™, even after it’s caked in mud.
The low height Flare™ Windshield is 4” shorter than the mid height UTV Flare™ Windshield. This allows for better field of view with lowered seat bases or shorter drivers. The lower height also allows for better viewing for steep approach angles during aggressive technical rock crawling, trail riding, or closed course competition.
The UTV Flare™ Windshields are made from hard-coated polycarbonate.
Installation is a snap, and all necessary hardware is included. The kit comes with patented AXIA Alloys detach clamp hardware, roll cage clamps, and thumbscrew turn knobs, machined from billet-aluminum, then black anodized.
Low Height Measurements
2019+ RZR and 2018+ Turbo Models:
Height from hood at flip (in front of driver/passenger at "hood bolster"): 4.25"
Height from hood at center: 4.40"
Width across center: 40.75" wide
Mid Height Measurement
2019+ RZR and 2018+ Turbo Models:
Height from hood at flip (in front of driver/passenger at "hood bolster"): 9.75"
Height from hood at center: 8.25"
Width across center: 40.125"
Modification may be required for aftermarket roll cages and cages with intrusion bars.
FITMENT
-
2021+ RZR Trail
-
2021+ RZR Trail S
-
2019+
-
RZR XP 1000
-
2019+ RZR XP 4 1000
-
2021 RZR Turbo S
-
2021 RZR Turbo S 4
- 2019-2021 RZR XP Turbo
- 2019-2021 RZR XP 4 Turbo
- 2018-2020 RZR XP Turbo S
- 2019-2020 RZR XP 4 Turbo S
INSTALL INFORMATION
Installation Instructions for Flare™ Windshield for Polaris RZR
PART NUMBERS
SIZE |
DESCRIPTION |
PART # |
KW PART # |
Low Height (4.25") | Tint | 2317-0421 | KWW-05-0530 |
Low Height (4.25") | Dark Smoke | 2317-0422 | KWW-05-0529 |
Mid Height (9.75") | Clear | 2317-0418 | KWW-05-0525 |
Mid Height (9.75") | Tint | 2317-0419 | KWW-05-0527 |
Mid Height (9.75") | Dark Smoke | 2317-0420 | KWW-05-0526 |